Log4OM

Is there a way to set a net frequency and mode?
When I log a net I do not see how to set up the mode and band or frequency.

Bill

If you are using CAT control with a radio the frequency and mode are what the rig is set to

Without a radio connected to Log4OM.....

1. Settings - Click suspend CAT reading
2. Set the mode in the 'QSO info (F1) tab
3. Set the frequency in the 'QSO info (F1) tab (This will automatically set the band)
4. Use the Net control and the frequency, mode and band will be as that selected in 2 and 3 above

Thank you Terry, that is very helpful.