Log4OM

A question when i click on a station in cluster then my radio is not responding (flip to that frq) or is it not possible.

If you DOUBLE click on a cluster spot, then the radio should change to that freq and mode, and the callsign is inserted into Log4OM's main window - Callsign field. If you single click on a spot, then that spot's callsign is inserted into Log4OM's callsign field, and the station info should be updated in Log4OM, but no radio change.

I also use an IC-7600 and it works great with Log4OM. I use OmniRig and the Rig Type in the OmniRig settings window should be set to "IC-7600". I have also found that it works best to set in OmniRig Setup - the Poll int. ms and the Timeout. ms to something low like 200.

Doug - W7DRM

Thank jou for answer,

I have try it but my radio is not responding.

I have dubble click but then the radio change from lsb to usb( why i don,t no) but not to the right frequentie hmmmm strange this.

Yes it works program restart

Occasionally, that will happen with my IC-7600 and Log4OM, the mode will change, but not the freq. To fix this, I just open the OmniRig settings dialog and change the comport to something not being used, click ok, reopen OmniRig settings and select correct comport, then ok. That seems to reset things and the freq and mode will change with a double click. This is easier than a program restart.

Maybe that will help.

Doug - W7DRM