Log4OM

Hello,

I connected a FTDX3000 via USB to the Computer.
On LOG4OM I use CAT via OMNIRig and start the LOG4OM Communicator.
On the Transceiver I set Menue 065 MODE CW PC KEYING to DTR and in OMNIRig Settings RTS high, DTS high.
when I push the field PTT in the upper menue at LOG4OM or when I send a message in fldigi the Transceiver goes to TX, but activates the microphone instead of the "data" channel.

Where do I have to look, what cabn I try to get digital transmissions running?

73 Jörg

Hi Jorg, we need support from someone with DX3000...
first of all: are you aware that Omnirig author often update his omnirig ini files without updating the main program setup?
I suggest you to download INI files as a separate package from omnirig website and refresh your own INI files

Hello,

I downloaded the newest ini files - still have the same Problem.
It would be great to get someone here using the ftdx3000 with Log4OM and fldigi.
We could compare the Settings.
If I push the PTT buttom in Log4OM s menue should that activate the mic or the data line?
On my config the PTT activates the mic and fldigi also.
73
Jörg

Hi Jorg,

I don't have a 3000, Icom here, but it sounds like you need to be in a data mode, or in your rig menu system, tell it that the PTT is coming into a port on the back of the rig, not the mic. Also, not sure why you are pressing the PTT on Log4OM. Fldigi should engage PTT when it transmits.

Hope that makes sense.

Doug - W7DRM