Log4OM

Hi all,

When i click an call finding in the cluster software My radio goes to this frequency which the caller uses. But it changes also my filter to the 'M' instead leaving it to the "W' mode.
When i disable 'set mode' it does not changes the frequency anymore.
So how can i disable the change filter option in LOG4OM ?
ow hehe it's about an Icom IC-7200 and using Omni-rig. (it connect's fine)

tnx for answer *maybe*

73 PD8EER

Hi, log4om doesn't (intentionally) apply any filter or setting to your rig.
The omnirig interface take care of everything on that side.
I simply send a message to omnirig interface with frequency and, if needed, mode required (that is USB, LSB, AM, FM, DIGI and similar).

Everything else is done, incidentally or with intentions, by Omnirig.

I suggest you to download latest INI file definitions (that aren't included in their setup package). Everything omnirig did is contained in those config files, personalized on your rig model

IW3HMH wrote:Hi, log4om doesn't (intentionally) apply any filter or setting to your rig.
The omnirig interface take care of everything on that side.
I simply send a message to omnirig interface with frequency and, if needed, mode required (that is USB, LSB, AM, FM, DIGI and similar).

Everything else is done, incidentally or with intentions, by Omnirig.

I suggest you to download latest INI file definitions (that aren't included in their setup package). Everything omnirig did is contained in those config files, personalized on your rig model

I did do that after youre tip. tnx for reply. But still have the same problem with omnirig ore log4om.
Offcource i changed my rig in omnirig to the new ini file. But still when i connect an call in the cluster it switches to M in my icom and not switch to the W option. So i must every time manually change it back to W.

Have you contacted Alex at Omnirig to ask for his advice??

G4POP wrote:Have you contacted Alex at Omnirig to ask for his advice??

tnx for this idea, i wrote him an email. If it works i will posted in here! Tnx for thinking with me

73 PD8EER
Berrie