Log4OM

Hello FM,

I tried to connect my FT450D with log4Om via omni rig.

I see Com 4 in my windows Com ports, but radio doens't connect.

All info welcome.

73 - Rudi - ON7CL

Rudi,
These issues are always caused by a mismatch of com port or baud rate and sometimes bit rate - Please ensure your radio is actually connected to com 4 and that the radio and Omnirig are set to the same baud rate.

The only other reason could be a faulty interface cable between the radio and computer or an incorrect menu setting in the radio

Hi,

Tnx for the info, cable was faulty.

73 - Rudi

Ah Ha!