Log4OM

Hello
I'm still testing Log4om and I have some questions about clusters
1) what does * mean in the cluster here
2) why I do not see the same thing in the "simple" cluster and the "super" cluster
For example on the "super" cluster I see
ZS2EZ ; CU5AM etc ...
but I don't see these calls on the "normal" cluster ?

I read the documentation (in French) but I don't see some explanations about that

Thanks for your help ...

Because the "simple" cluster is the raw data received from the selected telnet cluster while the super cluster is a COMBINATION of data from HRDLOG and the telnet cluster

OK Terry

and the *.....?

Thanks again

F6FLU wrote: 04 May 2019, 08:20 OK Terry

and the *.....?

Thanks again

LOTW user

ah OK, thanks

Terry,

Can you explain
"Because the "simple" cluster is the raw data received from the selected telnet cluster while the super cluster is a COMBINATION of data from HRDLOG and the telnet cluster"

If I do not check the show data from HRDlog.net box on the super cluster I would have assumed that the remaining spots would match the regular cluster. But it does not.

Rich

kd0zv wrote: 13 Dec 2019, 13:39 Terry,

Can you explain
"Because the "simple" cluster is the raw data received from the selected telnet cluster while the super cluster is a COMBINATION of data from HRDLOG and the telnet cluster"

If I do not check the show data from HRDlog.net box on the super cluster I would have assumed that the remaining spots would match the regular cluster. But it does not.

Rich

Not necessarily because some of the raw spots may be older than the age set in Log4OM, from memory I think we only display spots in the cluster window that are younger than 30 minutes.

Secondly some spots may be grouped so if G4POP was spotted three times when grouped only one entry will be displayed in the main cluster although all three will be in the raw data and information about all of the occasions that I was spotted are available by hovering over the spot with the cursor.

Finally of course you may have filtered spots in some way by using the built in filters in Log4OM

Well I am still lost.

I can change my cluster address to my local 127.0.0.1 which should be just CWskimmer. I do not have the box checked for HRDlog.net and I am getting spots from all bands and all modes. So it its not coming from HRDlog.net and not coming from my local host I am curious where it is coming from.

I am not going to worry about it as I know V2 is just around the corner.

73 and Merry Christmas Terry

Rich
kd0zv