Page 1 of 1

CAT Issues

Posted: 19 Feb 2020, 03:43
by vu2mb
Hi
For last couple of weeks since I installed Log4OM V2 hamlib was working properly and now
for last two days it is not connecting. It shows I am connected to my radio while its not.
Omnirig doesn't work either. WSJT-X works fine with hamlib on other port.

Few days ago I have upgraded to V2.3 and it stopped looking up QRZ for info etc so I have come back to V2.2
Please suggest what to do?
73
Bhanu
VU2MB

Re: CAT Issues

Posted: 19 Feb 2020, 05:11
by vu2mb
Just wanna add that I am using Apache Labs ANAN 8000DLE as Kenwood TS2000.
These sdr's works on Kenwood TS2000's CAT commands.

73
Bhanu
VU2MB

Re: CAT Issues

Posted: 19 Feb 2020, 07:58
by G4POP
You cannot share a port with Hamlib, if you want to share the port with Log4OM and WSJT you must use Omnirig and that is what MUST be selected in WSJT

Re: CAT Issues

Posted: 19 Feb 2020, 16:11
by vu2mb
G4POP,

Thanks for your response. I am not sharing port. WSJT-X using a different pair Port 9 and 10
while Log4OM using port 7&8 and it was working for last few weeks.

73
Bhanu
vu2mb

Re: CAT Issues

Posted: 19 Feb 2020, 16:23
by G4POP
vu2mb wrote: 19 Feb 2020, 16:11 G4POP,

Thanks for your response. I am not sharing port. WSJT-X using a different pair Port 9 and 10
while Log4OM using port 7&8 and it was working for last few weeks.

73
Bhanu
vu2mb
I am not familiar with it but presumably the software your using provides multiple CAT connections? Which use VSP's to connect to other software?

Hopefully a user that has same set up can help