Page 1 of 1

How to get my power lower than 1W on log?

Posted: 22 Feb 2014, 14:42
by SM5MEK
I was recently operating qrpp and found that on " my pwr" it is not possible to print 0,5. Lowest is 1. Can´t use decimal, or . Is it possible to get that field to accept , or . as decimals. Also number 0 as first number. Other way is to allow letters in the field, so i can print 180mW instead of 0,180.
Hpe to see u on cw fq soon.
72 de SM5MEK Jenny ;)

Re: How to get my power lower than 1W on log?

Posted: 22 Feb 2014, 14:53
by G4POP
Hi Jenny,
No we need to fix this to enable a TX power settin as low as 0.001 watt

I will add this to our Mantis list