Log4OM

I have recently installed the logbook and PST rotator on a laptop. I've got slightly stuck with the settings in UDP outbound connections. I've got the PST rotator listed in UDP outbound connections but it still won't work. Do I have to put something into the IP address, maybe the IP address that is in the PST rotator settings?

Hi,

I have PSTrotator and works tine with Log4OM.

If you permit remember two important things:

1 You need inform PSTRotator (Setup) you are using Log4om.
2 In PSTRotator in Mode, you need select "Tracking"

Perhaps you have already done it, but in case...

Have a nice weekend

In the UDP outbound settings I entered in 12040 under port. I called it PST rotator and selected PST rotator from the service type. I can't remember, do I have to put something in the destination IP address field?

Hi Penn

I will tell you about my experience.
The configuration is simple and if you strictly follow the Log4OM Manual, everything will be fine, not forgetting to check the details I mentioned before, in PSTRotator:
In Tracker you must select Log4OM
Mode: Tracking