Log4OM

If I double click on any spot, my radio beeps as if it is changing, but it does NOT actually change. is this an issue of the ts590s and my SG. I know there were other programs I had this issue, and the 590sg was added. the sg is not in the omnirig listing am i doing something wrong. this is with version 2.10 and the new 2.11

Any Kenwood ini should work, try a TS2000 ini file

ok I will

it makes no difference which kenwood I select. have to check with omnirig.

ve3wej wrote: 26 Dec 2020, 13:12 it makes no difference which kenwood I select. have to check with omnirig.

What connection are you using the USB connection or the acc socket?

I am using the db9 connector for cat control in log4om, and the usb connection for wsjt, and other sound card software.

1 thing I found today is n3fjp does do complete cat changing, from its cluster. so I checked the ini file for omni rig. even the in for the ts590 is correcupt, maybe

[pmTx]
Command=(TX1;)
;Command=(TX0;)
;c TX0; âêëþ÷èòñÿ ìèêðîôîí âî âñåõ ðåæèìàõ. Åñëè ýòî íàäî, çàêîììåíòèðóéòå ñòðîêó ñ TX1; è ðàñêîììåíòèðóéòå ñòðîêó ñ TX0;
ReplyLength=0


the above is what I found in the file. is this correct?? its the same as the ini files located at afreet website

Furthur to my testing, I find the any Kenwood that I use, does in fact change mode, but not the frequency

ve3wej wrote: 30 Dec 2020, 21:01 I am using the db9 connector for cat control in log4om, and the usb connection for wsjt, and other sound card software.

1 thing I found today is n3fjp does do complete cat changing, from its cluster. so I checked the ini file for omni rig. even the in for the ts590 is correcupt, maybe

[pmTx]
Command=(TX1;)
;Command=(TX0;)
;c TX0; âêëþ÷èòñÿ ìèêðîôîí âî âñåõ ðåæèìàõ. Åñëè ýòî íàäî, çàêîììåíòèðóéòå ñòðîêó ñ TX1; è ðàñêîììåíòèðóéòå ñòðîêó ñ TX0;
ReplyLength=0


the above is what I found in the file. is this correct?? its the same as the ini files located at afreet website

That looks corrupt to me, did you try downloading the rig files again from Omnirig?

I did, and they appear to be that way on Alex's sight. am curious why it seems the log4om does not support omnirig 2.1?? is there a reason. was there that much code change?

ve3wej wrote: 31 Dec 2020, 00:16 I did, and they appear to be that way on Alex's sight. am curious why it seems the log4om does not support omnirig 2.1?? is there a reason. was there that much code change?

OM,

My copy of the ts590 ini file has the same corruption line in it. I don't have a Kenwood so don't use the file, but I have all the ini's downloaded.

You should reach out to Alex about that corrupted line of code.

RE the frequency / mode situation. Have you looked into the Log4OM V2 Configuration / CAT Interface and possibly select the Send MODE before FREQ to radio tic box?

As for the Suisse version of Omnirig here is a link to a comment Terry and Danielle made some time ago. It still stands today as there just isn't any communications from the developer of that version.

https://forum.log4om.com/viewtopic.php?f=1&t=3713