Printing Log
Posted: 17 Apr 2014, 18:31
When printed, the log drops the minutes in the UTC column ie; 22:5..., also, the Band and Grid are not shown even though I added them to the log page. I went to the
VIEW Configuration page and added Band and Grid. I have adjusted column widths as necessary to accommodate the new columns. However, when I print the page it always comes out the same. UTC, incomplete, the QTH column is much wider than it needs to be, do not need the END time. It seems like the printed log is not able to be changed.
Having said all of this, maybe I am not saving my changes correctly or maybe I'm not using the correct printing procedure.
Help and ideas would be appreciated. BTW all else is working great.
Andy, W3LI
Found the answer, Logbook not configurable as per User Manual. Too bad, disappointed. At least the time should be printed. Back to pen and paper log.
VIEW Configuration page and added Band and Grid. I have adjusted column widths as necessary to accommodate the new columns. However, when I print the page it always comes out the same. UTC, incomplete, the QTH column is much wider than it needs to be, do not need the END time. It seems like the printed log is not able to be changed.
Having said all of this, maybe I am not saving my changes correctly or maybe I'm not using the correct printing procedure.
Help and ideas would be appreciated. BTW all else is working great.
Andy, W3LI
Found the answer, Logbook not configurable as per User Manual. Too bad, disappointed. At least the time should be printed. Back to pen and paper log.