Log4OM

I fail to have CAT control active in Log4OM2.

Configuration: mcHF SDR into WSJT-X into Log4OM2. In WSJT-X I am using rig Yaesu FT-817 via Com3.

In Log4OM2 activated Omni-rig for FT-817 com3 but still Cat frequency is still Offline. What am I missing?

73 Ronald

Hello
if you use com port # 3 in WSJT you cannot ask Log4OM to use this same port ... configure Omnirig with com port # 3 and ask WSJT and Log4OM to use Omnirig ...
73

Thks, fixed it.