Log4OM

Hi Lele, Terry,

I am using the Keyer Interface with TCI protocol and the frea is appearing at the top of the window but not in field beloz (Freq and RX freq) so once logged there is no frequency showing.

I presume this is a bug.

Thanks

After closing and re opening it works now

Hi Terry,

Actually there is really an issue I am using EESDRv3 0.13.0 alpha, maybe it is why it is not working as I think they upgraded TCI version anyway it is working fine in the main interface where frequency show properly but in the keyer interface window there is no frequency, it is a bit boring to enter manually for both freq (tx and rx) for each qso

Thanks

Hi,
I am using EESDR3 o.13.0 build 08072022 and just checked that although the main frequency read out is fine its not filling the input frequencies

Noted and we will fix this

Thank you

Fixed and being tested by team for next release

Terry,

Another issue now.
Using EESDR3 0.13.0 build 02092022

Log4OM does not track most of the time the mode.

If I am in USB and switch on the radio to CW log4OM follows but back to USB on the radio log4OM does not switch back to USB, happens a lot.
This is the next version to be released fixing the above issue.

Thanks

F4BPO wrote: ↑14 Sep 2022, 04:00 Terry,

Another issue now.
Using EESDR3 0.13.0 build 02092022

Log4OM does not track most of the time the mode.

If I am in USB and switch on the radio to CW log4OM follows but back to USB on the radio log4OM does not switch back to USB, happens a lot.
This is the next version to be released fixing the above issue.

Thanks

Checking

I reverted to last stable version of Log4OM and no issues it is only on the beta.