Hamlib issue in v 2.25.0.0

[WR0H]

I am using a Flex 6600 with SliceMaster and connecting via Hamlib was working flawlessly through version 2.24.

I just upgraded to version 2.25 and now have a connection issue that rebooting/restarting the programs doesn't solve. The CAT/Hamlib settings were carried over from 2.24 as expected and the connection icons all are green, but in reality the radio is not communicating with Log4OM and the freqency display shows "OFFLINE". None of the settings changed during the upgrade, and when I downgraded back to 2.24 it connects immediately.

Here are my settings that are working with version 2.24 but not 2.25.

cat.jpg (118.15 KiB) Viewed 1153 times

[KI5IO]

Bill,

I had received an e-mail from Mike - w9mdb (Hamlib) and he advised of an issue with a version of Hamlib affecting Flex rigs.

They are working on an updated release that will likely be released soon.

Once done Lele will have to add into Log4OM.

[WR0H]

Thanks--2.24 works fine so I'll stay with that until it gets lined out.

[w9mdb]

You can replace the hamlib in Log4OM in \Users\[username]\AppData\Roaming\LOG4OM2\Hamlib

From here -- unzip and copy the bin directory into there.

https://n0nb.users.sourceforge.net/

[KI5IO]

You can replace the hamlib in Log4OM in \Users\[username]\AppData\Roaming\LOG4OM2\Hamlib

From here -- unzip and copy the bin directory into there.

https://n0nb.users.sourceforge.net/

Mike,

Tnx for the direction & update.

[w9mdb]

Flex problem has been fixed....

Download the zip file -- extract -- and copy all in the bin directory to C:\Users\[username]\AppData\Local\Log4OM2\hamlib

https://n0nb.users.sourceforge.net/

Mike W9MDB