Cluster command issues

[K4TOR]

Anyone else have issues with cluster commands sent directly to the cluster server from the cluster window not working? I am not filtering "inside" the application. Trying to lessen the load.

SET/DXBM 1051393364/16042

no effect. Most bands are still pouring in.
Cluster: VE7CC-1

Tor - K4TOR

[G4POP]

1. Are you registered with the cluster
2. Did it work before
3. Is VE7CC the primary cluster in log4om
4. Are you sure the command is valid - Watch the real-time log window and see what response you get from VE7CC

[K4TOR]

1. Are you registered with the cluster
2. Did it work before
3. Is VE7CC the primary cluster in log4om
4. Are you sure the command is valid - Watch the real-time log window and see what response you get from VE7CC

1. I am registered.
2. Never worked
3. It is primary
4.

1749 ve7cc.net:23: -> SET/DXBM 1051393364/16042
1749 ve7cc.net:23: K4TOR de VE7CC-1 28-Feb-2023 1749Z CCC >
1749 ve7cc.net:23: BandMode Filter set to 1051393364/16042
1749 ve7cc.net:23: DX BandMode Filter set to Reject: 30-CW,17-CW,12-CW,6-CW,2-CW,1-CW,70-CW,30-RTTY,17-RTTY,12-RTTY,6-SSB,2-SSB,1-FM,70-FM,60-SSB,17-SSB,12-SSB,6-FM,2-FM,1-SSB,70-SSB,MW-MW
1749 ve7cc.net:23: K4TOR de VE7CC-1 28-Feb-2023 1749Z CCC >

[G4POP]

Surely that indicates the command is sent and actioned by VE7CC? What makes you think otherwise?

[K4TOR]

Surely that indicates the command is sent and actioned by VE7CC? What makes you think otherwise?

Sure. But when I look at the Cluster (F8) screen, they still show up. Maybe I'm missing something, Terry. I would think that when I send the command to the cluster from the cluster command line, it would take effect on the cluster screen.

[G4POP]

Yes but you must allow time for the backlog to clear before you see th filtered results

[K4TOR]

Yes but you must allow time for the backlog to clear before you see th filtered results

You know what, Terry, you're absolutely right.

tor