Label printing "QSL via..."
Posted: 18 Mar 2023, 12:42
Dear fellow hams,
for sending QSL cards, I am using the "Label print" option. The station call that you have worked comes out bold and with a larger font on the first line on the label. This is fine for most QSO's. However, when the card need to be send to a QSL card manager, I am using the "QSL via" option. The call sign "via" is not printed bold and almost at the bottom of the label.
My QSL manager asked me to print the call sign where to send the card to in bold and in a large font. If this is the QSL manager then this sould also be the case. (the QSL buro is handeling thousands of cards and focussing on the bold printed call sign).
Is it possible to reconfigure the label layout, like the position "QSL VIA ......" (my preference would be at the first line) and printed in a bold font?
73, Nico PA3ADU
for sending QSL cards, I am using the "Label print" option. The station call that you have worked comes out bold and with a larger font on the first line on the label. This is fine for most QSO's. However, when the card need to be send to a QSL card manager, I am using the "QSL via" option. The call sign "via" is not printed bold and almost at the bottom of the label.
My QSL manager asked me to print the call sign where to send the card to in bold and in a large font. If this is the QSL manager then this sould also be the case. (the QSL buro is handeling thousands of cards and focussing on the bold printed call sign).
Is it possible to reconfigure the label layout, like the position "QSL VIA ......" (my preference would be at the first line) and printed in a bold font?
73, Nico PA3ADU