Ability to assign VFO offset to Omnirig Radio
Posted: 16 Apr 2023, 14:46
Hi,
The VFO offset is great for sat work.
Would it be possible to add the ability to asign that offset to either Omnirig radio 1 or 2?
Thus only applying the VFO offset to one radio connected and not both.
example, My QO-100 station is on Radio 2 so needs VFO offset applied, but if I switch across to HF on radio 1, I then also need to turn off the VFO offset etc to log correctly.
So the ability to select Radio 1, Radio 2, Both or Off would prove very useful.
many thanks for a great program.
The VFO offset is great for sat work.
Would it be possible to add the ability to asign that offset to either Omnirig radio 1 or 2?
Thus only applying the VFO offset to one radio connected and not both.
example, My QO-100 station is on Radio 2 so needs VFO offset applied, but if I switch across to HF on radio 1, I then also need to turn off the VFO offset etc to log correctly.
So the ability to select Radio 1, Radio 2, Both or Off would prove very useful.
many thanks for a great program.