Limited VFO displayed
Limited VFO displayed
HDSDR ver 2.8
Com0com
Win 10
FT2000D
Omnirig 2.1
Run as admin and not as admin.
The VFO and fields below show reduced information. ( see attached image )
The displayed frequency in log4m changes with the radio and vice versa.
HDSDR also works the whole way through.
If I negate the connection to HDSDR and setup LOG4OM with direct com port, all is fine and all frequency fields are filled..
Love some help with this.
Thanks ZL1HIM
- DF5WW
- Log4OM Alpha Team
- Posts: 2035
- Joined: 02 May 2013, 09:49
- Location: Kraam, Rhineland Palatinate, Germany
- Contact:
Re: Limited VFO displayed
Omnirig V2 is not from Afreet Software, it´s a modified version by a HB9 OM. We know that this version has problems
working together with Log4OM but the swiss guy don´t make any changes. Latest original Omnirig is 1.20.
working together with Log4OM but the swiss guy don´t make any changes. Latest original Omnirig is 1.20.
73´s .. Juergen ... ALT-512 SDR (10W) , 50 m random wire at SG-211 autotuner, 2 x Xiegu G90 (20W HF TRX) one as portable Radio. Also TS-790E (40 W) for VHF/UHF with X-50 vertical and Duoband 4-Element LPDA.
Re: Limited VFO displayed
Thank you for the help.
I will try with some earlier version of omnirig and HDSDR.
Thanks again
Ian ZL1HIM
I will try with some earlier version of omnirig and HDSDR.
Thanks again
Ian ZL1HIM
- DF5WW
- Log4OM Alpha Team
- Posts: 2035
- Joined: 02 May 2013, 09:49
- Location: Kraam, Rhineland Palatinate, Germany
- Contact:
Re: Limited VFO displayed
Hello Ian,
Omnurig V1.20 is not an earlier version. It´s the latest one of the original Omnirug and from this year. The originals handling only
max, 2 transceivers and the modified Swiss version handles 4. The mistake with V2.1 is that it not works errorfree with Log4OM
V2 and that could be the reason for this problem. I don´t say that 2.1 is the bad part but it´s possible.
Omnurig V1.20 is not an earlier version. It´s the latest one of the original Omnirug and from this year. The originals handling only
max, 2 transceivers and the modified Swiss version handles 4. The mistake with V2.1 is that it not works errorfree with Log4OM
V2 and that could be the reason for this problem. I don´t say that 2.1 is the bad part but it´s possible.
73´s .. Juergen ... ALT-512 SDR (10W) , 50 m random wire at SG-211 autotuner, 2 x Xiegu G90 (20W HF TRX) one as portable Radio. Also TS-790E (40 W) for VHF/UHF with X-50 vertical and Duoband 4-Element LPDA.
Re: Limited VFO displayed
Ian,
To add to Juergen's comments ...
I got an e-mail from the Swiss developer two weeks ago. He confirmed that his fork or version of the CAT application is no longer being worked on or developed and he also confirmed that it does not work with Log4OM.
This the URL where you can get Omnirig V 1.2 that does work with Log4OM along with all the current Rig ini files.
Description: http://www.dxatlas.com/OmniRig/
Download: http://www.dxatlas.com/Download.asp
.
To add to Juergen's comments ...
I got an e-mail from the Swiss developer two weeks ago. He confirmed that his fork or version of the CAT application is no longer being worked on or developed and he also confirmed that it does not work with Log4OM.
This the URL where you can get Omnirig V 1.2 that does work with Log4OM along with all the current Rig ini files.
Description: http://www.dxatlas.com/OmniRig/
Download: http://www.dxatlas.com/Download.asp
.
73 - Nolan Kienitz - KI5IO
Plano, TX
Plano, TX
Re: Limited VFO displayed
Guys, success !!
Thanks again for your help. I downloaded the trial of win4yaesu and everything plays happily together now.
win4yaesu + HDSDR (omnirig 2.1) + LOG4OM (omnirig 1.2) and com0com to hang it all together
Will invest in win4yaesu full version.
Ian ZL1HIM
Thanks again for your help. I downloaded the trial of win4yaesu and everything plays happily together now.
win4yaesu + HDSDR (omnirig 2.1) + LOG4OM (omnirig 1.2) and com0com to hang it all together
Will invest in win4yaesu full version.
Ian ZL1HIM