Icom filter

Ed,

Make sure your IC-756 has the latest/official drivers installed on your PC from the ICOM folks.

Then (or maybe first ... your choice) you could possibly try different "ini" files that are available in the OmniRig 'rigini' zip file.

Clip below is from a zip file I d/l'd today from the OmniRig ...

PE1PIN

... But when I switch from the cluster in log4omV2 it also change the filter settings in my Icom 7610 from 3,6K to 1,2K.

How do I prevent that?

And is a setup available that wsjtx takes over the call you want to work from the cluster?

Thank you in advance.

73,

Roland

ct1edg

... before. After installed the log4om and setup the omnirig for my radio Icom -7300 i noticed every time i use the jtdx it changes the filter on my radio. Normally i use the FIL1 (Filter1) with a bigger bandwith than the others, but jtdx still change the filter for FIL2 witch has a shorter bandwith for ...

... on a cluster spot for a CW station, it switches my radio to the 500 hz filter for some reason.

Last night I did a full re-install of Log4OM and ... click on and off so I leave it off. Everything else appears to be stable so far.

But have you updated the ICOM IC7700 firmware in your radio?

... also removed a problem that I did not mention that it was changing the filter on the rig every time I clicked on a cluster spot that was on CW. Now I just need to figure out why the lookup for countries is taking so long on some callsigns.

Some time ago Icom changed the command structure for the ...

W4GHV

... tool/procedure I should have used from the start.

Third, for the Icom rigs, this required a simple fix to Omnirig .ini for the radio, to force it to stay on filter 1 for data modes.

Thanks for all the help.

Evidently, running in admin mode is very complicated and probably dependent on ...

Nolan,
Its the old filter issue with icom radios defaulting to filter 2 when clicking a cluster spot caused by the ini file for the radio

pd2mic

i found it my self!
with the 7610 you can change fil1/2/3 in the bandwith settings..
so you can change the 1.8k/2.4k/3.0k in setting fil1/2/3 just tap the BW and change with the vfo/dial the amount in value..
now at my radio is fil1 1.8k fil2 3.0k fil3 2.4k
hope this will help amateurs in the future ...

pd2mic

... i am an new user of the log4om and i like it alot!!
now everything is running oke, i notice that when i have select an spot in the cluster my filter setting changes from 3.0k to 2.4k
after switching the filter back to 3.0k manual on the radio, and selecting an other station in the cluster the ...

A search reveals that the filter is a known Omnirig issue and the fix is listed

search.php?keywords=Icom+filter

The mode change sounds like you need to set the Omnirig pol Int to 100

Search found 47 matches: Icom filter

Re: CAT is changing the bandwidth filter - why?

filter setting changes

Wrong filter selection on Icom 7300

Re: Frequency not auto populating

Re: Frequency not auto populating

Re: WSJTX/JTALERT/LOG4OM logging not working-SOLVED

Re: Cluster selection

Re: icom 7610 filter change after switching station in cluster

icom 7610 filter change after switching station in cluster

Re: Mode change LSB to USB with cluster Call selection