FLdigi Frequency tracking

[VA3KA]

I am finally starting to work through the complete setup and integration of Log4OM.

I successfully set up FLdigi to exchange freq and logs today.

But it seems that the frequency displayed in FLdigi is tracking the B VFO (rather than VFO A) on my FT-2000.

While tuning VFO A the freq. display in FLdigi switches to 0.000 momentarily then reverts back to the freq. in VFO B.

While tuning VFO B it tracks smoothly.

The VFO A and VFO B frequencies are correctly displayed in Log4OM and track correctly but only VFO B data is displayed tracked in FLdigi.

Any suggestions?

Thanks,
Ken VA3KA

[G4DWV]

I'd suggest contacting the FLDigi Yahoo group. Dave, the developer, is on hand to give excellent first hand support.

Good luck

73 de Guy G4DWV/4X1LT

[VA3KA]

Did a little more digging (including contacting the FLDigi yahoo group) on this.

When I look at the Log4OM Communicator panel, in the Rig Status box:

CAT CONNECTED

But the frequency displayed is from VFO B on the FT-2000, not VFO A.

When tuning VFO B this freq. tracks accordingly.

Maybe this is why FLDigig is displaying info from VFO B (not A)?

Thanks,
Ken VA3KA

[G4DWV]

Hi Ken,

Assuming you have the latest and correct XML config file, I would expect that it would need to be modified to correct this display behaviour to that which you would prefer.

Other than that I am out of ideas, sorry . Good luck.

73 de Guy G4DWV/4X1LT

[VA3KA]

Update-

I have it working ok now.

I reinstalled Omnirig and all is ok now frequency sends to FLDigi as it should from VFO A.

Problem closed!

73,
Ken VA3KA

[NN7D]

Excellent Ken. Thanks for letting us know!

Doug - W7DRM