Missed MODE field when exporting to ADIF

[EA3IN]

Hi all

Now, whenever I export QSOs to ADIF from any option, the MODE field is missing.

I'm using now version 1.24

It was working before

What might I am doing wrong?

Thanks
Marcel

[EA3IN]

No one else is experiencing this behaviour?

[G4POP]

No one else is experiencing this behaviour?

Here is an ADIF export that I just did and as you can see the mode is present - Are you certain the mode is present in the log entry?

<ADIF_VERS:5>3.0.4 <PROGRAMID:6>Log4OM <PROGRAMVERSION:9>1.25.0.12 <eoh>

<ADDRESS:70>UPCOTE COTTAGE CHILBOLTON STOCKBRIDGE
HAMPSHIRE
SO20 6BA
England <A_INDEX:2>12 <ANT_AZ:3>255 <ANT_PATH:1>S <BAND:3>60m <CALL:7>G3RDQ/P <CONT:2>EU <COUNTRY:7>England <CQZ:2>14 <DISTANCE:2>71 <DXCC:3>223 <EQSL_QSLSDATE:8>20160331 <EQSL_QSL_RCVD:1>N <EQSL_QSL_SENT:1>Y <FREQ:6>5.3985 <FREQ_RX:6>5.3985 <GRIDSQUARE:6>JJ00AA <ITUZ:2>27 <LOTW_QSL_RCVD:1>N <LOTW_QSL_SENT:1>N <MODE:3>SSB <MY_CITY:17>Burnham on Crouch <MY_CNTY:7>England <MY_COUNTRY:7>England <MY_CQ_ZONE:2>14 <MY_GRIDSQUARE:6>JO01JP <MY_ITU_ZONE:2>27 <MY_NAME:5>Terry <MY_POSTAL_CODE:7>CM0 8EY <MY_RIG:11>Icom IC7600 <MY_STREET:16>28 Hillside Road <NAME:17>DAVID C GRIFFITHS <OPERATOR:5>G4POP <OWNER_CALLSIGN:5>G4POP <STATION_CALLSIGN:5>G4POP <PROGRAMID:6>Log4OM <PROGRAMVERSION:9>1.25.0.12 <QSL_RCVD:1>N <QSL_SENT:1>N <QSO_DATE:8>20160331 <QSO_DATE_OFF:8>20160331 <QTH:9>HAMPSHIRE <RST_RCVD:5>59+10 <RST_SENT:2>59 <RX_PWR:3>100 <SRX:1>0 <STX:1>0 <TIME_OFF:6>101815 <TIME_ON:6>101418 <TX_PWR:3>100 <K_INDEX:1>2 <LAT:9>51.495065 <LON:9>-0.175781 <PFX:1>G <SFI:2>84 <CLUBLOG_QSO_UPLOAD_DATE:8>20160331 <CLUBLOG_QSO_UPLOAD_STATUS:1>Y <HRDLOG_QSO_UPLOAD_DATE:8>20160331 <HRDLOG_QSO_UPLOAD_STATUS:1>Y <QRZCOM_QSO_UPLOAD_DATE:8>20160331 <QRZCOM_QSO_UPLOAD_STATUS:1>Y <SOTA_REF:8>G/SC-007 <EOR>

[EA3IN]

Hello

I've solved the problem

I recall I modified the Mode List in expert mode config.
I've restored the default files and it is now working again.

Thanks