Hello I switch radio from MAIN to SUB my logbook does not follow correct. My MAIN i use USB-D swith to SUB radio stay on USB MODE the LOG4ON V2 take mode RTTY don't chance to SSB. Also the Freq 14231 is ok only the RX Freq 14074 ??
73 Pat
MAIN to SUB Yaesu FTDX-101D
-
DF5WW
- Log4OM Alpha Team
- Posts: 2035
- Joined: 02 May 2013, 09:49
- Location: Kraam, Rhineland Palatinate, Germany
- Contact:
Re: MAIN to SUB Yaesu FTDX-101D
Hello Pat,
which CAT system (Omnirig or Hamlib) and if Omnirig what version. Also needed is the information
about your OS and the used Log4=M Version (see Help/ABout). In Omnirig do the same, latest original
is V 1.19.
Are Omnirig (if you use it) is running with administrator privileges and Log4OM too ? That´s needed
to use the multithreading functions of it. Are you have the latest rig.ini for your transceiver ?
which CAT system (Omnirig or Hamlib) and if Omnirig what version. Also needed is the information
about your OS and the used Log4=M Version (see Help/ABout). In Omnirig do the same, latest original
is V 1.19.
Are Omnirig (if you use it) is running with administrator privileges and Log4OM too ? That´s needed
to use the multithreading functions of it. Are you have the latest rig.ini for your transceiver ?
73´s .. Juergen ... ALT-512 SDR (10W) , 50 m random wire at SG-211 autotuner, 2 x Xiegu G90 (20W HF TRX) one as portable Radio. Also TS-790E (40 W) for VHF/UHF with X-50 vertical and Duoband 4-Element LPDA.
Re: MAIN to SUB Yaesu FTDX-101D
Hello Juergen,
I use Omnirig V1.19 here. I use WIN 10 Home and LOG4OM V2 V2.4.0.0.
I don't run Omnirig and LOG4OM V2 as administrator privileges.
I run the FT-991 rig.ini for my transceiver i use the Rigini file from 01/04/2020.
73 Pat - ON3CQ
I use Omnirig V1.19 here. I use WIN 10 Home and LOG4OM V2 V2.4.0.0.
I don't run Omnirig and LOG4OM V2 as administrator privileges.
I run the FT-991 rig.ini for my transceiver i use the Rigini file from 01/04/2020.
73 Pat - ON3CQ
