Page 2 of 2

Re: Current release 2.33.0.0 (25/07/2024) not uploading to QRZ

Posted: 20 Aug 2024, 10:38
by PD1GAW
Made an (FT8) contact with EC3A, loc JN00 at 20-8-2024, 10:23:45 UTC.
It is now 10:37:42 UTC; no auto-upload yet.

How long does this normally take?

PD1GAW

Re: Current release 2.33.0.0 (25/07/2024) not uploading to QRZ

Posted: 20 Aug 2024, 10:40
by G4POP
Instantly unless QRZ is busy during a contest

How is the WSJT program marking the QRZ sent status when sending to Log4OM?

Re: Current release 2.33.0.0 (25/07/2024) not uploading to QRZ

Posted: 20 Aug 2024, 10:50
by PD1GAW
I used QSL manager ans this was the result:
Upload successful: 'COUNT=1&RESULT=OK&LOGID=1137688596' for QSO Callsign: EC3A Date: 20-8-2024 10:23:45 Band: 10m Mode: FT8
QRZCOM END
HTH,

PD1GAW

Re: Current release 2.33.0.0 (25/07/2024) not uploading to QRZ

Posted: 20 Aug 2024, 13:20
by G4POP
PD1GAW wrote: 20 Aug 2024, 10:50 I used QSL manager ans this was the result:
Upload successful: 'COUNT=1&RESULT=OK&LOGID=1137688596' for QSO Callsign: EC3A Date: 20-8-2024 10:23:45 Band: 10m Mode: FT8
QRZCOM END
HTH,

PD1GAW
If it works in QSL manager then it will work in auto mode also, UNLESS WSJT is sending the QSO with QRZ sent status incorrect

Its a WSJT issue I bet you that a QSO logged manually say for SSB or CW in Log4OM auto uploads to QRZ fine

Check the log file

Re: Current release 2.33.0.0 (25/07/2024) not uploading to QRZ

Posted: 20 Aug 2024, 17:34
by PD1GAW
G4POP wrote:
G4POP wrote: 20 Aug 2024, 13:20 [quote=PD1GAW post_id=47804 time=<a href="tel:1724151026">1724151026</a> user_id=5002]
I used QSL manager ans this was the result:
Upload successful: 'COUNT=1&RESULT=OK&LOGID=<a href="tel:1137688596">1137688596</a>' for QSO Callsign: EC3A Date: 20-8-2024 10:23:45 Band: 10m Mode: FT8
QRZCOM END
HTH,

PD1GAW
If it works in QSL manager then it will work in auto mode also, UNLESS WSJT is sending the QSO with QRZ sent status incorrect

Its a WSJT issue I bet you that a QSO logged manually say for SSB or CW in Log4OM auto uploads to QRZ fine

Check the log file
The calls I uploaded through QSL manager where WSJT generated in the LOG4OM log.
Does that change what you said?

And where do I find the log file please?

It seems very strange to me, It has always worked and I’m not aware of any changes I made.
Did the new LOG4OM requirements for upload change in any way?

PD1GAW

Re: Current release 2.33.0.0 (25/07/2024) not uploading to QRZ

Posted: 20 Aug 2024, 17:41
by G4POP
We have changed nothing in that area for ages but it seems something may have changed in the JT software

Re: Current release 2.33.0.0 (25/07/2024) not uploading to QRZ

Posted: 20 Aug 2024, 17:43
by G4POP
EMAIL EMAIL EMAIL TO ME A SUPPORT REQUEST - DO NOT POST IT HERE!

Also send me the wsjt logbook adif

Re: Current release 2.33.0.0 (25/07/2024) not uploading to QRZ

Posted: 21 Aug 2024, 13:06
by PD1GAW
G4POP wrote: 20 Aug 2024, 17:43 EMAIL EMAIL EMAIL TO ME A SUPPORT REQUEST - DO NOT POST IT HERE!

Also send me the wsjt logbook adif
I sent the adif log file to [email protected].
Couldn’t find your mail-address, so…

73, PD1GAW

Re: Current release 2.33.0.0 (25/07/2024) not uploading to QRZ

Posted: 21 Aug 2024, 15:08
by G4POP
PD1GAW wrote: 21 Aug 2024, 13:06
G4POP wrote: 20 Aug 2024, 17:43 EMAIL EMAIL EMAIL TO ME A SUPPORT REQUEST - DO NOT POST IT HERE!

Also send me the wsjt logbook adif
I sent the adif log file to [email protected].
Couldn’t find your mail-address, so…

73, PD1GAW

Did you check QRZ for my email?

THe support request is generated from the Log4OM help menu, see our web site for instructions about how to do that.

Re: Current release 2.33.0.0 (25/07/2024) not uploading to QRZ

Posted: 22 Aug 2024, 14:45
by PD1GAW
Thanks for your support Terry!

73, Gerard PD1GAW