Log4OM

new set up finding my way round I 0ahve omni rig talking to my IC 735 however

If click a spot mode changes on 735 not band ?
If I move dial on 735 the CAT/Log follows.
If change mode on 735 mode does not change
If I enter a qso it will not add it until I have manually enter the mode

something must be amiss in my cat set up tried also with WSJT and no go either

thank you

It may be that your radio does not support all commands due to its age

However make certain that you have the latest version of Omnirig installed, I think its V 1.6 and also the latest rig files

Thanks Terry

I do have the latest omnirig 1.16 and associated files and 1.16 does support the 735 and yes its as old as my licence ...... :

I will hunt around for more info I cannot be the only one using a IC 735 WSJT-X and JT-Alert which accounts for 95% of my work.

I was hoping to get away from HRD 73 Jacques

F1VEV wrote:Thanks Terry

I do have the latest omnirig 1.16 and associated files and 1.16 does support the 735 and yes its as old as my licence ...... :

I will hunt around for more info I cannot be the only one using a IC 735 WSJT-X and JT-Alert which accounts for 95% of my work.

I was hoping to get away from HRD 73 Jacques

Try changing the Poll Interval in Omnirig to 100ms and report what happens

Hi Terry

changing polling made no difference fro the moment using HRD radio control only and JT65 to Log4OM works fine