Page 1 of 1
LOTW upload error
Posted: 03 Aug 2020, 20:36
by TA4AU
Hi I use 2.8.0.0 when i upload LOTW selected qso on QSL manager window give time error. "No has QSO time info on line 097xxxx. Also same problem QRZ.com loogbook manuel upload i cant see my qso time.
Need Help
Re: LOTW upload error
Posted: 04 Aug 2020, 21:55
by G4POP
Check your QSO's you will find one that does not have a start or end time, the messages says it all
Re: LOTW upload error
Posted: 05 Aug 2020, 05:33
by TA4AU
Im new users Log4om and i was made 40 qso on log4om. My 40 qsos give this error, no one qso. I cant change time or date on program. Normal usage, only write Callsign and wait qrz.com and press enter for save thats all.
Look also no has time info qrz.com loogbook
Re: LOTW upload error
Posted: 05 Aug 2020, 07:12
by G4POP
Where did the QSO's you are trying to upload originate?
Imported ADIF from another logger
WSJT type program, if so which software and what method of import to Log4OM
Data program like DM780, FLDigi, MixW etc
Manual direct input into Log4OM at time of the QSO (This I doubt or there would automatically be a time)
Some other obscure method
Also what data does the identified line show
Re: LOTW upload error
Posted: 05 Aug 2020, 07:16
by G4POP
TA4AU wrote: 05 Aug 2020, 05:33 I cant change time or date on program. Normal usage, only write Callsign and wait qrz.com and press enter for save thats all.
You should not need to change time when logging live QSO's Log4OM should show time automatically, are you saying no time is displayed in Log4OM?
You can enter the time manually by clicking on the padlock by the time field, its in the user guide!
Re: LOTW upload error
Posted: 05 Aug 2020, 07:20
by G4POP
Unlike the screen shot you posted I notice when looking up your call on QRZ that the logbook display shows the time on all QSO's you entered for last few days, here is a screen shot!
- Capture.JPG (87.18 KiB) Viewed 4302 times
Re: LOTW upload error
Posted: 05 Aug 2020, 08:13
by TA4AU
Thank you master for fast reply.
Can you to review my ADI file ?
its my last qso adi only 1 qso. Give same error time. No upload TQSL or log4om qsl manager
#++++++++++++++++++++++++++++++++++++
# Log4OM 2 by IW3HMH version 2.8.0.0
#
http://www.log4om.com
# created: 5 Ağustos 2020 Çarşamba
#++++++++++++++++++++++++++++++++++++
<ADİF_VERS:5>3.1.0 <PROGRAMİD:7>Log4OM2 <PROGRAMVERSİON:7>2.8.0.0 <eoh>
<A_İNDEX:2>16 <ANT_AZ:2>35 <ANT_EL:1>0 <BAND:3>20m <BAND_RX:3>20m <CALL:4>UC9V <CONT:2>AS <COUNTRY:14>Asiatic Russia <CQZ:2>18 <DXCC:2>15 <EQSL_QSLSDATE:8>20200804 <EQSL_QSL_RCVD:1>R <EQSL_QSL_SENT:1>Y <FREQ:9>14.187000 <İTUZ:2>31 <LOTW_QSL_RCVD:1>R <LOTW_QSL_SENT:1>R <MODE:3>SSB <SUBMODE:3>USB <MY_CNTY:6>Turkey <MY_COUNTRY:6>Turkey <MY_CQ_ZONE:2>20 <MY_DXCC:3>390 <MY_GRİDSQUARE:6>KM57gs <MY_İTU_ZONE:2>39 <MY_NAME:5>Rasid <NAME:6>VICTOR <STATİON_CALLSİGN:5>TA4AU <PROGRAMİD:7>LOG4OM2 <PROGRAMVERSİON:7>2.8.0.0 <QSL_RCVD:1>N <QSL_RCVD_VİA:1>E <QSL_SENT:1>N <QSL_SENT_VİA:1>E <QSO_COMPLETE:1>Y <QSO_DATE:8>20200804 <QSO_DATE_OFF:8>20200804 <RST_RCVD:2>59 <RST_SENT:2>59 <SWL:1>N <TİME_OFF:6>144914 <TİME_ON:6>144501 <TX_PWR:3>100 <K_İNDEX:1>2 <MY_LAT:7>37.7708 <MY_LON:7>30.5417 <QSO_RANDOM:1>Y <SFİ:2>73 <HRDLOG_QSO_UPLOAD_DATE:8>20200804 <HRDLOG_QSO_UPLOAD_STATUS:1>Y <APP_L4ONG_SATELLİTE_QSO:1>N <APP_L4ONG_CONTEST:1>N <APP_L4ONG_QSO_CONFİRMATİONS:650>[{"CT":"EQSL","S":"Yes","R":"Requested","SV":"Electronic","RV":"Electronic","SD":"2020-08-04T00:00:00Z"},{"CT":"QRZCOM","S":"Requested","R":"No","SV":"Electronic","RV":"Electronic"},{"CT":"HAMQTH","S":"Requested","R":"No","SV":"Electronic","RV":"Electronic"},{"CT":"HRDLOG","S":"Yes","R":"No","SV":"Electronic","RV":"Electronic","SD":"2020-08-04T00:00:00Z","EXT":" CALL:4 UC9V QSO_DATE:8:d 20200804 TIME_ON:6 144501 EOR "},{"CT":"CLUBLOG","S":"Requested","R":"No","SV":"Electronic","RV":"Electronic"},{"CT":"QSL","S":"No","R":"No","SV":"Electronic","RV":"Electronic"},{"CT":"LOTW","S":"Requested","R":"Requested","SV":"Electronic","RV":"Electronic"}] <APP_L4ONG_QSO_AWARD_REFERENCES:131>[{"AC":"DXCC","R":"15","G":"AS","SUB":[],"GRA":[]},{"AC":"WAC","R":"AS","SUB":[],"GRA":[]},{"AC":"WAZ","R":"18","SUB":[],"GRA":[]}] <EOR>
Re: LOTW upload error
Posted: 05 Aug 2020, 08:27
by TA4AU
I think i find problem. Look to Time line and see big i TIME, time , is ok but TİME dont accept ,Turkish alphatic dont accept big i, must be I or i no İ how to fix it ?
Re: LOTW upload error
Posted: 05 Aug 2020, 08:43
by TA4AU
I export my last qso adif file and cut extra info look Write is
TİME_ON its must be TIME or time
Not accept big TİME .
Can i change my computer keybord language or how to fix it
<BAND:3>20m <CALL:4>UC9V <MODE:3>SSB <SUBMODE:3>USB <QSO_DATE:8>20200804 <
TİME_ON:6>144501 <EOR>
Re: LOTW upload error
Posted: 05 Aug 2020, 08:49
by TA4AU
I change my keybord language and windos language and now upload correct time