It's my understanding that both LOTW and EQSL now support the MSK144 mode. I have added it to my drop down mode box. All is well for logging MSK144 contacts. Running version 1.27.
However, whenever I do an upload to LOTW or EQSL, they report that I have uploaded a JT9 (Data) contact... is there another setting somewhere I need to change?
Bill WB9KPT
Another MSK144 Question
-
IW3HMH
- Site Admin
- Posts: 2988
- Joined: 21 Jan 2013, 14:20
- Location: Quarto d'Altino - Venezia (ITA)
- Contact:
Re: Another MSK144 Question
Please share the row you added to the MODELIST.csv file
Daniele Pistollato - IW3HMH
Re: Another MSK144 Question
Hi Daniele... From my ModeList_user.csv file, this could be the problem: MSK144;JT9;JT9
What do each of the positions mean in this entry?
What do each of the positions mean in this entry?
-
DF5WW
- Log4OM Alpha Team
- Posts: 2035
- Joined: 02 May 2013, 09:49
- Location: Kraam, Rhineland Palatinate, Germany
- Contact:
Re: Another MSK144 Question
This is the problem. You have to change all 3 positions to MFSK144 
As it now is it shows MFSK in the drop down list but it loads up JT9 to eQSL and LotW.
As it now is it shows MFSK in the drop down list but it loads up JT9 to eQSL and LotW.
73´s .. Juergen ... ALT-512 SDR (10W) , 50 m random wire at SG-211 autotuner, 2 x Xiegu G90 (20W HF TRX) one as portable Radio. Also TS-790E (40 W) for VHF/UHF with X-50 vertical and Duoband 4-Element LPDA.
-
IW3HMH
- Site Admin
- Posts: 2988
- Joined: 21 Jan 2013, 14:20
- Location: Quarto d'Altino - Venezia (ITA)
- Contact:
Re: Another MSK144 Question
First row of the modelist file explains your doubts:
Mode (as shown in Log4OM) | Mode (as exported in ADIF 2.0) | Mode (as exported in ADIF 3.0) | Submode (ADIF 3.0)
Mode (as shown in Log4OM) | Mode (as exported in ADIF 2.0) | Mode (as exported in ADIF 3.0) | Submode (ADIF 3.0)
Daniele Pistollato - IW3HMH
Re: Another MSK144 Question
Thank you Daniele and Juergen. Updated the file and all works fine now!
Bill WB9KPT
Bill WB9KPT
