Another MSK144 Question

Need help? - Post here and we will find a solution for you.
Locked
wb9kpt
Advanced Class
Posts: 32
Joined: 17 May 2015, 00:56
Location: Evergreen, CO

Another MSK144 Question

Post by wb9kpt »

It's my understanding that both LOTW and EQSL now support the MSK144 mode. I have added it to my drop down mode box. All is well for logging MSK144 contacts. Running version 1.27.

However, whenever I do an upload to LOTW or EQSL, they report that I have uploaded a JT9 (Data) contact... is there another setting somewhere I need to change?

Bill WB9KPT
User avatar
IW3HMH
Site Admin
Posts: 2988
Joined: 21 Jan 2013, 14:20
Location: Quarto d'Altino - Venezia (ITA)
Contact:

Re: Another MSK144 Question

Post by IW3HMH »

Please share the row you added to the MODELIST.csv file
Daniele Pistollato - IW3HMH
wb9kpt
Advanced Class
Posts: 32
Joined: 17 May 2015, 00:56
Location: Evergreen, CO

Re: Another MSK144 Question

Post by wb9kpt »

Hi Daniele... From my ModeList_user.csv file, this could be the problem: MSK144;JT9;JT9

What do each of the positions mean in this entry?
User avatar
DF5WW
Log4OM Alpha Team
Posts: 2035
Joined: 02 May 2013, 09:49
Location: Kraam, Rhineland Palatinate, Germany
Contact:

Re: Another MSK144 Question

Post by DF5WW »

This is the problem. You have to change all 3 positions to MFSK144 ;)
As it now is it shows MFSK in the drop down list but it loads up JT9 to eQSL and LotW.
73´s .. Juergen ... ALT-512 SDR (10W) , 50 m random wire at SG-211 autotuner, 2 x Xiegu G90 (20W HF TRX) one as portable Radio. Also TS-790E (40 W) for VHF/UHF with X-50 vertical and Duoband 4-Element LPDA.
User avatar
IW3HMH
Site Admin
Posts: 2988
Joined: 21 Jan 2013, 14:20
Location: Quarto d'Altino - Venezia (ITA)
Contact:

Re: Another MSK144 Question

Post by IW3HMH »

First row of the modelist file explains your doubts:

Mode (as shown in Log4OM) | Mode (as exported in ADIF 2.0) | Mode (as exported in ADIF 3.0) | Submode (ADIF 3.0)
Daniele Pistollato - IW3HMH
wb9kpt
Advanced Class
Posts: 32
Joined: 17 May 2015, 00:56
Location: Evergreen, CO

Re: Another MSK144 Question

Post by wb9kpt »

Thank you Daniele and Juergen. Updated the file and all works fine now!

Bill WB9KPT
User avatar
IW3HMH
Site Admin
Posts: 2988
Joined: 21 Jan 2013, 14:20
Location: Quarto d'Altino - Venezia (ITA)
Contact:

Re: Another MSK144 Question

Post by IW3HMH »

Good news :)
Daniele Pistollato - IW3HMH
Locked