log4omV2 wsjt-x settings

[PA0AER]

When I read the manual there is only one port necessary for information exchange between log4omV2 and wsjt-x. But in my case I need two.
One for for fill in the qso in the qso window and one for logging. This are my settings, do i something wrong?

LOG4OM NextGeneration Inbound: JT _MESSAGE [2237] WSJT
LOG4OM NextGeneration Inbound: ADIF_MESSAGE [2333] ADIF

WSJT-X 127.0.0.1 UDP server 2237
WSJT-X logged contact ADIF broadcast 2333

Another question is that during the qso the reports (S and R) in the qso window are always on +00. The logging report is OK

Thnaks in advance for the help

[G4POP]

I think you are reading the section about JTAlert/WSJT/Log4OM there is another section about direct logging from WSJT to Log4OM which shows the two connections

[PA0AER]

Thanks, everything is working now ok, except the reports during qso.
Another issue: When the DX station is using a gridsquare with more then 4 characters, Log4OM2 cannot calculate the QRB

[G4POP]

When the DX station is using a gridsquare with more then 4 characters, Log4OM2 cannot calculate the QRB

Detailed example please and state mode and integrated software if any

[PA0AER]

K5WE in EM25ex on 20m FT8
No Distance report (0)
only wsjt-x and log4om2

[G4POP]

K5WE in EM25ex on 20m FT8
No Distance report (0)
only wsjt-x and log4om2

Strange it works fine for me with both WSJT and JTDX

Untitled.jpg (151.2 KiB) Viewed 6517 times

[PA0AER]

That is nice for you

[G4POP]

Please send us your log file

BTW the sarcasm is unnecessary

[PA0AER]

You mean th whole adif file?

[G4POP]

You mean th whole adif file?

No the log file, go to help menu