Good day everyone.
I am new at this wonderful Log40M software but I am having an issue with LotW. Mainly is that although the manual upload takes place (automatic after closing program does not work), I am not able to see the uploaded QSOs at the lotw website. My Log40M settings are Ok, I believe. Here are some snapshots:
73
LotW upload
LotW upload
- Attachments
-
- 11LotW_qslmanager2.gif (216.13 KiB) Viewed 2433 times
-
- 11LotW_externalservices.gif (97.48 KiB) Viewed 2433 times
Rafael / NN3RP
- G4POP
- Log4OM Alpha Team
- Posts: 11592
- Joined: 21 Jan 2013, 14:55
- Location: Burnham on Crouch, Essex UK
Re: LotW upload
Did you watch the YouTube tutorials for Confirmations part 1 and part 2 and also latest user guide?
73 Terry G4POP
Re: LotW upload
Terry, thanks for replying. I watched both of your most recent videos and they are excellent tutorials. I did also read the manual for the current version which matches your video tutorial.
My problem is that after the manual upload to LotW, which does not generate any errors, I cannot find /see my QSOs at the LotW website. Since I am new at this software there are only 15 QSO total entries. Something is amiss
Also, on another note, I just check the eQSL and, although the upload is there, they are not listed as Satellite:
Here is another eqsl picture that I just uploaded with recent satellite QSOs from TQSL software. Notice the (SAT) entry:
My problem is that after the manual upload to LotW, which does not generate any errors, I cannot find /see my QSOs at the LotW website. Since I am new at this software there are only 15 QSO total entries. Something is amiss

Also, on another note, I just check the eQSL and, although the upload is there, they are not listed as Satellite:
Here is another eqsl picture that I just uploaded with recent satellite QSOs from TQSL software. Notice the (SAT) entry:
Rafael / NN3RP
- G4POP
- Log4OM Alpha Team
- Posts: 11592
- Joined: 21 Jan 2013, 14:55
- Location: Burnham on Crouch, Essex UK
Re: LotW upload
See the other thread today where Juergen explains about Sat QSO uploads to EQSL and LOTW might help you
73 Terry G4POP
- DF5WW
- Log4OM Alpha Team
- Posts: 2035
- Joined: 02 May 2013, 09:49
- Location: Kraam, Rhineland Palatinate, Germany
- Contact:
Re: LotW upload
73´s .. Juergen ... ALT-512 SDR (10W) , 50 m random wire at SG-211 autotuner, 2 x Xiegu G90 (20W HF TRX) one as portable Radio. Also TS-790E (40 W) for VHF/UHF with X-50 vertical and Duoband 4-Element LPDA.
Re: LotW upload
I wanted to update this post with my troubleshooting. I think I nailed it to be the Station ID not being there initially. I mostly think that I did not have the password correct too. Once one has the correct LotW account setup (user, password, tqsl path, temp path), Log40M allows to use the Station ID pulldown. In there you will see all of the LotW ID you have under your Tqsl software.
I did a test log and quit Log40M....after a few minutes my test log appeared on LotW website!
Back to doing some Sats
I did a test log and quit Log40M....after a few minutes my test log appeared on LotW website!
Back to doing some Sats
Rafael / NN3RP