Skimmer spots

[G4POP]

Terry,

Thanks. That is a great video! Very helpful. Is there any way to pause or freeze the skimmer spots?

Rob
WR3Y

No you cannot stop the flow unless you disconnect

Filtering will of course slow the flow

[G6VMR]

HI Terry

Latest 1.20.0.0

[G4POP]

HI Terry

Latest 1.20.0.0

Puzzled !

You can see telnet spots received from the reverse beacon network server but you don't see spots direct from CW Skimmer software or the aggregator WintelnetX?

But you see the raw data from CW Skimmer and WintelnetX in the cluster connect screen?

Are you sure that you have not got skimmer and WintelnetX set to just send CQ calls? That would perhaps lead you to think they were not being received!

Only other suggestion is to download a fresh version of Log4om and reinstall in case you had a bad download.

I just tested all and everything worked fine

[G6VMR]

Hi

Terry I will try your suggestion. All calles are passed for this test. Cant work it out as RBN works direct and so does a normal cluster.

Will update when I get further. Just want rbn and cluster on same window.

Martin

[HB9ETR]

Hi Terry,
Not sure if this has been covered.....
...but is there a way to have the IP address stored in the drop downs? I am having to set the IP for the skimmer each time I use it...which generally means I need to watch the video again to get the IP address (good for your hits:) ).

[G4POP]

Options first tab

Check "expert mode"

Edit the cluster text file