If I make a 60 meter contact the band does not show up in the EDIT QSO window but does get displayed in the
Recent QSO window. If I try to add it manually it will not stay. This only occurs with 60 meters.
60 meter band not logging properly
60 meter band not logging properly
Mike Burton
xe2/n6kzb
xe2/n6kzb
- G4POP
- Log4OM Alpha Team
- Posts: 10880
- Joined: 21 Jan 2013, 14:55
- Location: Burnham on Crouch, Essex UK
Re: 60 meter band not logging properly
You don't show the frequency in your screen shot, is there one?
73 Terry G4POP
Re: 60 meter band not logging properly
Yes freq is captured in all instances..
Mike Burton
xe2/n6kzb
xe2/n6kzb
Re: 60 meter band not logging properly
I can confirm.
Band does not show up for me either.
Oddly enough you can see 60m flicker in the band location as the window opens but is blank after.
Band does not show up for me either.
Oddly enough you can see 60m flicker in the band location as the window opens but is blank after.
- Attachments
-
- 2020-02-28_15-12-21.gif (16.58 KiB) Viewed 6364 times
73,
Rich
KD0ZV
Log4OM Alpha Team
Rich
KD0ZV
Log4OM Alpha Team
Re: 60 meter band not logging properly
I have also seen a similar issue when logging from WSJT on 60m.
In my case the log entry looks good and the band info shown correct but if you go to edit the qso record
the band info (both TX & RX) is blank.
Doing a manual qso entry on 60m directly seems to work OK, all other band qsos' logged from WSJT are also
not a problem.
Log4OM 2.3.0.0
WSJT v2.1.2
In my case the log entry looks good and the band info shown correct but if you go to edit the qso record
the band info (both TX & RX) is blank.
Doing a manual qso entry on 60m directly seems to work OK, all other band qsos' logged from WSJT are also
not a problem.
Log4OM 2.3.0.0
WSJT v2.1.2
Graham
M0GWC
M0GWC
Re: 60 meter band not logging properly
In my case information is:
Callsign: M0GWC
IARU: 1
Station Country: England
ITU: 27
CQ: 14
Callsign: M0GWC
IARU: 1
Station Country: England
ITU: 27
CQ: 14
Graham
M0GWC
M0GWC
Re: 60 meter band not logging properly
Was hoping to see the fix in the latest release, but not yet.
Perhaps next release?
Perhaps next release?
Mike Burton
xe2/n6kzb
xe2/n6kzb
Re: 60 meter band not logging properly
Is a fix being considered?
As you can see by the posts, I am not the only one with this issue.
Thanks and enjoying Log4OM.
Adios
As you can see by the posts, I am not the only one with this issue.
Thanks and enjoying Log4OM.
Adios
Mike Burton
xe2/n6kzb
xe2/n6kzb